Description
The camera port needs the narrow Zero ribbon cable. The CSI connector on a Zero is smaller than the one on a full size Raspberry Pi, so a standard camera ribbon will not fit it. If you are pairing this with a camera module, budget for the Zero specific cable.
The smallest Raspberry Pi with wireless built in. A 65 mm board that runs the same Raspberry Pi OS as its larger siblings, draws very little power, and brings Wi‑Fi and Bluetooth without a dongle, which makes it a natural fit for sensors, small robots, camera builds, and anything that has to disappear inside an enclosure.
- Processor: Broadcom BCM2835, single‑core ARM1176JZF‑S at 1 GHz.
- Memory: 512 MB LPDDR2 SDRAM.
- Wireless: 802.11b/g/n Wi‑Fi on 2.4 GHz, plus Bluetooth 4.1 with Bluetooth Low Energy.
- Video: mini HDMI output, with composite video available on an unpopulated header.
- USB: one micro USB On‑The‑Go port for peripherals, and a second micro USB port for power.
- GPIO: HAT compatible 40‑pin header, supplied unpopulated so you can solder the connector your build needs.
- Storage: microSD card slot, which also carries the operating system.
- Board size: 65 × 30 × 5 mm.
